2007 New Holland Construction C190

$29,300.00


New/Used
Used
Usage
1500 Hours
Availability
In Stock
Location
MOUNTAIN VIEW EQUIPMENT COMPANY
VIN
N7M443707
Stock #
80-450-0
Title
Clean
Condition
Excellent
Year
2007
Manufacturer
New Holland Construction
Model
C190

Overview

Dealer Insights

AIR CONDITIONING
E-H CONTROLS
84" LOW PROFILE BUCKET

Description

Lifting performance with the unmatched stability of tracks. New Holland compact track loaders combine the best performance advantages into one machine. You get the superior reach and lift capacity of the exclusive Super Boom™ loader arm design along with the superior flotation, traction, and stability of tracks. The C185 and C190 are the ultimate high-performance machines for construction, utility, and grounds maintenance work.

    Patented Super Boom™ design advantages:
    • Vertical lift linkage lifts the load up and away for maximum reach at maximum height
    • Design also helps keep the bucket level for less spillback, even with a full load
    • Low center of gravity reduces tipping and increases lift capacity
    • Industry-leading rear visibility with no frame towers to block your view
    Advantages of wide, durable tracks:
    • Improved traction in loose, sandy, or muddy conditions so you can push heavier loads
    • Faster travel speeds—even over rough ground
    • Low ground pressure gives you maximum flotation and minimum soil disturbance
    • A wide stance (from 80.4 to 82.4 inches) improves stability and offers the smoothest ride
    Choose the track belt option that's right for you:
    • 17.7-inch track - maximum flotation for sensitive turf or soft conditions
    • 15.7-inch track - excellent flotation with additional traction
    SPECIFICATIONS
    • Angle of departure, degrees: 27
    • Dump angle (maximum), degrees: 45.3
    • Dump height (SAE), in. (cm): 101.9 (258.7)
    • Dump reach @ maximum height (SAE), in. (cm): 32.5 (83)
    • Height, in. (cm): 77 (196)
    • Height to hinge pin, in. (cm): 125.6 (319)
    • Ground clearance, in. (cm): 8.4 (21)
    • Length, in. (cm): 145.7 (352)
    • Operating height (max.), in. (cm): 153 (389)
    • Rollback angle (at carry position),degrees: 37.3
    • Track on Ground Length, in. (cm): 64.7 (164)
    • Clearance Circle, in. (cm): 158 (410)
    • Track Gauge, in. (cm): 64.8 (165)
    • Width w/ 15.7 in. (400 mm) belt, in. (cm): 80.4 (204)
    • Width w/ 17.7 in. (450 mm) belt, in. (cm): 82.4 (209)
    BUCKETS
    • Dirt/Foundry: Width: 84 in. (213 cm), SAE Heaped cap: 27.9 ft.3 (.79 m3), SAE Struck cap: 22.3 ft.3 (.63 m3), Weight: 480 lbs. (218 kg)
    • Low profile (heavy duty): Width: 84 in. (213 cm), SAE Heaped cap: 17.0 ft.3 (.48 m3), SAE Struck cap: 12.4 ft.3 (.35 m3), Weight: 550 lbs. (249 kg)
    • Light Material: Width: 84 in. (213 cm), SAE Heaped cap: 27.9 ft.3 (.79 m3), SAE Struck cap: 22.3 ft.3 (.63 m3), Weight: 500 lbs. (227 kg)
    • Manure/fertilizer: Width: 84 in. (213 cm), SAE Heaped cap: 22.5 ft.3 (.64 m3), SAE Struck cap: 18.2 ft.3 (.52 m3), Weight: 540 lbs. (245 kg)
    CAPACITIES
    • Cooling system, gal. (L): 4.5 (17)
    • Engine crankcase (w/filter), gal. (L): 3.2 (14.5)
    • Fuel tank, gal. (L): 21.5 (81.4)
    • Hydraulic oil system, gal. (L): 15.0 (56.8)
    PERFORMANCE
    • ANGLES: Maximum rollback @ ground, degrees: 37
    • ANGLES: Maximum bucket dump angle at full height, degrees: 45
    • BREAKOUT FORCE: SAE Bucket breakout force, lbs. (kg): 7,670 (3479)
    • BREAKOUT FORCE: SAE Boom breakout force, lbs. (kg): 6,229 (2825)
    • CYCLE TIMES: Raising time (with SAE operating load), sec.: 3.2
    • CYCLE TIMES: Dumping time (with SAE operating load), sec.: 2.3
    • CYCLE TIMES: Lowering time (empty), sec.: 4.3
    • CYCLE TIMES: Retract time (empty), sec.: 1.7
    • CYCLE TIMES: Total boom-cycle time, sec.: 11.5
    • DUMP REACH: SAE 45, in. (cm): 32.3 (81.9)
    • GROUND SPEED MAX: Low range, mph (kph): 5.1 (8.2)
    • GROUND SPEED MAX: High range, mpg (kph): 8.0 (12.9)
    • OPERATING LOADS: 35% of Tipping Load, lbs. (kg): 2,900 (1316)
    • OPERATING LOADS: 50% of Tipping Load, lbs. (kg): 4,143 (1879)
    • OPERATING WEIGHT: SAE, lbs. (kg): 9,295 (4216) note: Base unit plus full fuel tank, 165 lb (75 kg) operator, 84” dirt and foundry bucket, and 17.7” (450 mm) track belt width.
    • TIPPING LOAD: Without weights per SAE J-732, lbs. (kg): 8,286 (3758)
    • TIPPING LOAD: Hydraulic lift capacity, lbs. (kg): 3,670 (1665)
    UNDERCARRIAGE
    • System: High Drive Offset Tread Pattern
    • Idlers / Rollers per side: 2 / 4
    • Ground Pressure: 15.7 in. (400 mm) belt: 4.6 psi
    • Ground Pressure: 17.7 in. (450 mm) belt: 4.1 psi
    POWER TRAIN
    • Hydrostatic piston type pumps displacement, in.3 (CC): 2.81 (46)
    • Hydrostatic radial piston type motors with maximum displacement, in.3 (CC): 18.9 (310)
    • Torque at maximum displacement, ft.-lbs. (Nm): 1,256 (1703)
    ELECTRICAL
    • Alternator: 95 amp, solid-state rectifier and regulator
    • Battery: 12-volt 925 CCA @ O°F (-18°C) maintenance free
    • System protection: 30 amp circuit breaker
    • INSTRUMENTS: Hour meter, voltage alarm, hydraulic oil temperature light & alarm; coolant temperature light and alarm, fuel gauge, transmission charge pressure light and alarm, engine oil pressure light and alarm, seat belt light, air cleaner restriction light and alarm, transmission filter restriction light and alarm, parking brake reminder light.
    ENGINE
    • Manufacturer: New Holland
    • Model number: 445M2
    • Air cleaner: Dual stage, dry element filter
    • Bore and stroke, in. (mm): 4.1 x 5.2 (104 x 132)
    • Number of cylinders: 4
    • Displacement, in3 (L): 274 (4.5)
    • Fuel: Diesel
    • HORSEPOWER at 2300 rpm: Gross hp (kW): 81 (60),
    • HORSEPOWER at 2300 rpm: SAE net hp (kW): 74 (55)
    • SPEEDS: Fast, no load, rpm: 2,430-2,530
    • SPEEDS: Idle, no load, rpm: 1,000-1,100
    • SPEEDS: Peak Torque @1400 RPM, ft.-lbs. (nm): 236 (324)
    • SPEEDS: Torque Rise: 31%
    HYDRAULICS
    • BOOM CYLINDERS: Make: New Holland double acting
    • BOOM CYLINDERS: Bore and stroke, in. (cm): 2.5 x 17.6 (6.3 x 44.7)
    • BOOM CYLINDERS: Rod size, in. (cm): 1.25 (3.2)
    • BUCKET CYLINDERS: Make: New Holland double acting
    • BUCKET CYLINDERS: Bore and stroke, in. (cm): 2.75 x 24.06 (7 x 61.1)
    • BUCKET CYLINDERS: Rod size, in. (cm): 1.75 (4.4)
    • CONTROL VALVE: Three spool, open center
    • FILTRATION: 6 micron, spin-on filter
    • HYDRAULIC PUMP: Gear type, 21.9 gpm standard 34.7 gpm high-flow optional
    • OIL RESERVOIR, gal. (L): 5 (18.9)
    • RELIEF PRESSURE SETTING, psi: 3,000

    Specs

    Engine

    Engine Type
    445M2 4-cylinder
    Engine Manufacturer
    New Holland
    Horsepower
    at 2300 rpm: Gross: 81 hp (60 kW), SAE net: 74 hp (55 kW)
    Fuel Capacity
    21.5 gal. (81.4 l)

    General

    SAE Rated Operating Capacity
    OPERATING LOADS: 35% of Tipping Load: 2,900 lbs. (1316 kg), 50% of Tipping Load: 4,143 lbs. (1879 kg)
    Max Ground Speed
    Low range: 5.1 mph (8.2 kph), High range: 8.0 mph (12.9 kph)
    Length
    145.7 in. (370 cm)
    Width
    w/ 15.7 in. (400 mm) belt: 80.4 in. (204 cm), w/ 17.7 in. (450 mm) belt: 82.4 in. (209 cm)
    Height
    77 in. (196 cm)
    Weight
    SAE: 9,295 lbs. (4216 kg) note: Base unit plus full fuel tank, 165 lb (75 kg) operator, 84” dirt and foundry bucket, and 17.7” (450 mm) track belt width.
    Wheelbase
    Track on Ground Length: 64.7 in. (164 cm)